Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

The basic parameters and structural principle of the first conductive magnetic valve

Body material: 304/316 stainless steel

Use medium: water, air, gas, natural gas, etc., weak acid, weak base, slightly corrosive medium

Principle structure: direct motion diaphragm

Control method: normally closed, normally open

Pressure difference range: 0~1.0Mpa

Nominal pressure: 1.0Mpa

Medium temperature: -5~80°C

Ambient temperature: -5~60°C

Connection method: threaded connection, flange connection

Selection voltage: AC380V, 220V, 110V, 36V, 24V DC220, 110V, 36V, 24V, 12V

The structural principle of the first conductive magnetic valve:

The valve skillfully combines the first conductive magnetic valve, the manual valve and the throttle valve, and the pilot valve receives the electric signal switch to drive the main valve. Adjustment screws A and B adjust the medium viscosity range and main valve switching time and can be compensated after the main valve wears. When the pilot valve needs to be repaired, just tighten the adjusting screw B and the isolating screw C, and then remove it and use the manual screw. The screw can also be used to preset the maximum or minimum flow rate when the solenoid valve is automatically controlled.