According to reports, according to the new charging standards, the city's residential electric energy meter, water meter, gas meter and heat meter batch inspection, according to the number, the charge is reduced by 20% to 30% on the basis of the prescribed standards, the above four tables The inspection fee shall not be collected from the peasants or urban residents (except for voluntary entrustment). For the measurement of the measuring instruments of the community health service center and the community health station (excluding the secondary and secondary hospitals) approved by the township hospitals, the rural health clinics and the district and county health bureaus, 80% of the prescribed charging standards shall be accepted at the same time. The metrological verification institutions at all levels in our city shall carry out the metrological verification work in strict accordance with the prescribed verification cycle, and shall not arbitrarily adjust the verification cycle and increase the verification frequency. The verification fee for the taxi meter shall not exceed one year.
It is understood that the newly implemented charging standard of the city is only about 50% of the national standard. For example, the verification fee for a Class A and Class B (<=DN25mm) water meter is 12 yuan; A is not more than 6 cubic meters per hour. The verification fee for the B-class gas meter (gas meter) is 12 yuan; the charge for a single-phase electric energy meter below 1.0 is 20 yuan, and the verification fee for a three-phase electric energy meter below 1.0 is 50 yuan; The verification fee for the heat meter of Class 2~3 DN15 to DN25 is 50 yuan.
It is reported that in the future, all the national legal metrological verification institutions and authorized metrological verification institutions at all levels of the city will be charged the verification fee according to the regulations. For on-site verification of four types of measuring instruments, such as taxi meter, fuel dispenser, non-automatic weighing instrument for trade settlement, and medical measuring instruments, no other fees other than the verification fee may be charged.
The authenticity of this information has not been confirmed by the international electrical network, for your reference only.
From: Linyi Daily
The JUK universal Screw Terminal Block series has the typical features which are decisive for practical applications:
l The universal foot allows the terminal blocks to be easily snapped onto the NS35 or NS32 DIN Rail with G shape.
l Closed screw guide holes ensure screwdriver operation perfect.
l For terminal block with different wire cross-sectional areas, complete accessories are available, such as end plates, partition plates, etc.
l Potential distribution achieved by fixed bridges in the terminal center or insertion bridges in the clamping space.
l Same shape and pitch Grounding Terminal Blocks as the JUK universal series.
l Adopt ZB marker strip system,achieve unified identification.
Terminal Blocks Connector ,Electric Terminal Blocks Connector,Plastic Terminal Block,F Type Terminal Block Connector
Wonke Electric CO.,Ltd. , https://www.wkdq-electric.com