More than 90% of the demonstration section of Wuhan Avenue uses LED energy-saving lamps

Last night, the Wuhan Avenue Demonstration Section (Yuejiazui to Liyuan Square Section) lit up, and the 520-meter-long road was put on a shiny new dress. According to reports, this section of the road is called "two types of demonstration roads", more than 90% of the use of LED energy-saving lamps.


According to the plan, this road section will be built into the “four most” roads, namely the two types of demonstration roads with the most convenient and smooth traffic organization, the most neat and tidy street environment, the most complete green landscape and the most perfect municipal facilities.


According to reports, after the lighting plan of the Wuhan Avenue Demonstration Section was confirmed, the renovation took 3 months to complete. The 26 power buildings, including the Provincial Power Company, Donghu Chunshuli and Textile Building, installed landscape lighting. The 7 groves along the way were also decorated with lights. The two pedestrian bridges were drawn by a little light.


According to the introduction of the Municipal Urban Management Bureau, the landscape lighting of this section is based on bridges. The walls and trees of the government and institutions are used as the line, and the architectural lighting is the surface to form the lighting pattern of “point, line and surface”, which is overall, rich and beautiful. visual feeling. Whether it is lighting, decorative lights or billboards, LED lighting technology and energy-saving lamps are widely used. Although the lighting density is high, the energy consumption is not large.

The Preformed Fitting is mainly used in wire,ground wire installed hardware.                           

 According to the performance of the structure can be divided into:                                        

1. Preformed Suspension Clamp:used to hang the conductors and ground wires on the perch.                                

2. Preformed Strain Clamp:bears all tension,connect the wire and ground wire on the tension tower                    

3. Splicing Fitting:used to two ends of conductor,instead of the conventional hydraulic compression splicing sleeve and pressure pipe.                            

4. portective fitting:used to protect the conductors and insulators,generally divided into armor rod,repair sleeve,vibration damper.                     

Material generally adopt aluminum alloy,hot-dip galvanized steel.                                             

Fasteners are hot-dip galvanized steel.           

Preformed Fitting

Preformed Fitting,Preformed Line Fittings,Preformed Protection Fitting,Preformed Armour Rod

Jiangsu Chuandu Electrical Technology Co.,Ltd. , http://www.cdepf.com

Posted on