Frequency multiplier using delay line

Abstract: Any independent delay line, in conjuncTIon with a XOR gate, can be made into a clock frequency doubler by delaying the clock signal, and combining the delayed clock signal with the undelayed signal using the external logic. This applicaTIon brief demonstrates how it can be done with a DS1035. The technique works with the DS1100 and DS1135 series as well.

If a clock signal is delayed by one-quarter period, it can be gated with the original waveform to produce a novel applicaTIon: frequency-doubled output.

Figure

Figure

Figure

This TIme, the XOR propagation delay (tPD) will impact only the relative skew from input to output and will not otherwise distort the waveform. Obviously, the optimum delay time for this application is one-quarter of the input period. Deviation from this " ideal "value, or altering the input frequency, will cause a change in the output duty cycle but will not change the frequency. The minimum usable delay (lowest usable input frequency) is dependent only on the minimum acceptable output pulse width or duty cycle. The maximum usable delay (highest input frequency) is constrained by the minimum input pulse width specification of the delay line.

Figure

Figure

galvanized steel pole

1.Shape:Conical ,Multi-pyramidal,Columniform,polygonal or conical

2.Material:steel plate.stainless steel compound plate,stainless steel plate,ect.(anticorrosion treatment with hot galvanization,also color polyester power could be coated on the surface)

High strength low alloy steel Q235,Q345,GR65,GR50 to ensure the mechanical properity of microelement in order to ensure the quality of galvanization (other materials are also avaliable on request)

3.Jointing of pole with insert mode,innerflange mode,face to face joint mode

4.Design of pole :against earthquake of 8 grade ,aganist wind pressure of 160

5.Minimum yield strength:355 mpa

6.Minimum ultimate tensile strength :490 mpa

7.Max ultimate tensilestrength:620 mpa

8.Certificate:ISO9001-2000

9.Length:Within 14m once forming without slip joint

10.Welding:It has past flaw testing.Internal and external double welding makes the welding beautiful in shape

11:Packages:Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client required , each 40HC or OT can loading how many pcs will calculation base on the client actually specification and data

Our lighting equipment are made from quality sheet from bending,forming,automatic welding and hot galvanization.We can reach one-run machining length of 14m,and can bend sheet thickness up to 25mm.We adopt advanced welding procedures ,automatically weld main joints and reach rank-II welding quality.

electric pole

Galvanized Steel Pole,Galvanized Steel Electric Pole,Monopole Galvanized Steel Electric Pole,Galvanized Steel Street Lighting Poles

YIXING FUTAO METAL STRUCTURAL UNIT CO.,LTD( YIXING HONGSHENGYUAN ELECTRIC POWER FACILITIES CO.,LTD.) , https://www.chinasteelpole.com

Posted on