[PConline talk] In China, the saying that people use food as heaven has never been doubted. With more and more exchanges between China and foreign countries, the Chinese people are focusing on cooking traditional foods, and Western-style baked snacks that flow into the Mainland abroad have gradually become widespread. Many culinary masters are also focusing on the production of West Point while paying attention to traditional Chinese steamed food. However, steamers and ovens occupy a lot of area in the kitchen. Many consumers are very annoyed. "What should we do?"
Not afraid, there is a demand for both markets, in recent years, embedded kitchen appliances began to walk into the homes of ordinary people, following the early years of embedded kitchen cabinets, wardrobes, etc., embedded kitchen electricity has also embarked on its broad road.
Although embedded kitchen power has the advantages of small footprint and space saving, there are still many considerations in the installation details and installation process. For example, their heat dissipation, layout planning and so on, these are very sophisticated. Below, we will introduce how to better place embedded kitchen appliances from the aspects of installation location, reasonable layout, and installation dimensions.
First, determine the installation locationFrom the ergonomics point of view, the best location for the embedded steamer/oven is below the chest of the human body, which is usually referred to as the high cabinet, so that it is easy to test the inside of the body for baking or steaming. It is also convenient for us. Operate and get food.
(1) Ensure that the installation position is stable, and that the cabinet floor must be able to bear a weight of at least 60kg, and the material must be able to withstand high temperatures above 100°C. Therefore, it is best not to install in high cabinets or high cabinets, especially for families with children. This installation is not only inconvenient to pick up, but also causes potential safety problems.
(2) If an embedded oven and an embedded steamer are to be installed at the same time, one of them is installed in the middle of the high cabinet and the other is installed in the lower part of the high cabinet or in the base cabinet.
Don't think that you can install it with confidence when you choose the installation location. You must also consider the layout of the surrounding kitchen appliances to see if the built-in oven/steamer is compatible with the “neighborsâ€. Because high-temperature kitchen appliances such as ovens and steamers have a certain influence on the surrounding appliances, such as stoves and refrigerators, and consume them. The solution is: "away from" first and insulation second.
(1) In order to make full use of space, many small partners will choose to install the built-in oven/steamer in the cabinet under the cooker. We do not recommend this. Because the oven and the steamer work indoors at high temperatures, if placed under the cooker, the machine cross-flow fan will take a long time to dissipate the heat, which can damage the inlet pipe of the cooker and cause safety hazards.
(2) If you want to install it on the side of the refrigerator, you also need to add an insulation board, otherwise the refrigerator will not only consume more energy to achieve cooling effect, but also may damage the insulation layer of the refrigerator.
(3) Do not install electrical appliances and power outlets in locations that are prone to moisture or water.
The electrical circuit, ventilation, and heat vents of the embedded oven/steamer must be specially arranged. There should be a safety distance between the cabinet and the appliance to ensure the safe operation of the appliance in a confined space.
At present, the size of the embedded oven/steamer in the market is different. When designing the cabinet size, it is recommended that you go to Fangtai shop or online channel to select a specific product, and then report the model and size of the corresponding appliance to the cabinet-mounted chef. According to the size of electrical appliances to create a suitable whole cabinet. Even if the steamer and oven are not installed for the time being, you can also say hello to the master and set aside the cabinet.
In order to prevent the adjacent cabinet doors from being damaged by high temperatures, a certain gap is required between the embedded oven/steamer front panel and the cabinet cabinet for air circulation. The side of the embedded oven should be at least 45mm away from the rear of the oven, while the rear of the steamer should be at least 35mm to facilitate heat dissipation; the front of the oven should be more than 80cm to ensure that the appliance is Fully ventilated during operation.
Side too embedded oven
After you have opened a hole, you can set up your home appliances.
(1) Carefully insert the appliance into the hole to prevent the four corners of the built-in oven/steamer from being hit by hard objects.
(2) Connect the circuit and test if it can be used normally.
5. Other considerations
(1) During the renovation, it is necessary to rationally position the socket to ensure the safety distance of the embedded oven/steamer to the power supply. Multiple outlets or long-distance power strips that use multiple plugs too far from the power supply are prohibited.
(2) Fang Taizi oven should use 16 amp sockets with a diameter of 2.5 mm2 or more.
(3) When the platform is installed, no other kitchen appliances can be placed in the upper part of the embedded oven/steamer.
(4) All ventilation holes or vents must not be covered, otherwise it will affect the performance of the machine.
The above is all suggestions on the installation of embedded kitchen appliances. We do not know whether the guest officers are satisfied or not? With embedded kitchen appliances installed, in the embedded oven and steamer, I do not know if everyone has the right?
Let's introduce PConline to everyone.
Recommended Product One - Fang Tai KQD50F-
Fang Tai KQD50F-E2 electricity supplier price reading ...
Reference price: 5999 yuan
Recommended reason: Fantasy ovens generally use a flat design, the oven horizontally embedded, parallel to the panel and the table, the connection is tight and smooth, more stylish and beautiful, save space, and this seamless connection makes the panel and the table almost no health corner . Fangtai KQD50F-E2 adopts 3D hot air circulation temperature control technology, which has the same temperature and multi-position heating everywhere; 6-section baking mode, heat out the taste that suits you best, smart sensor probe and microcomputer system are highly suitable for temperature control flexible.
Its built-in intelligent temperature control technology, can calculate the temperature curve of food baking, so that baking is more simple, effective area of ​​50L, the actual area of ​​62L, a baking to meet the entire household volume; oil pollution design, timing insulation, automatic shutdown, automatic cooling, so that Baking is easier.
Recommended Product II - Fantasy SCD26-
Side too SCD26-E2 electricity supplier price is being read...
Reference price: 5240 yuan
Fantasy SCD26-E2 is a 26L large-capacity household electric steamer newly launched by Fanta too. The large volume can meet all the family's needs. Compared with the oven, the steamer can better preserve the original taste and nutrition of the ingredients and is healthier. This steamer uses a built-in water tank to ensure sufficient water, and the built-in high-precision sensor makes the temperature control of the steamer more accurate, delicious and more efficient.
This positive built-in 8 cooking programs can solve 4-6 people's food problems at one time, save time and effort, and is very suitable for busy working people. The steamer's door body is designed with heat insulation. It will not cause any hidden safety hazards due to the user's inadvertent contact while at the same time being able to better retain heat and reduce energy consumption. The steamer uses dual steam generators to increase the temperature, precise temperature control, and dynamic steam balance system to effectively keep the steam fresh and quickly discharge the low-temperature steam to reduce the odor between ingredients.
This is a special maskking High 2.0 e-cigarette product series. We sell maskking high 2.0 vape, maskking 1000 puffs, and other pod maskking high 2.0.
We are specialized electronic cigarette manufacturers from China, Vapes For Smoking, Vape Pen Kits suppliers/factory, wholesale high-quality
products of Modern E-Cigarette R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to
your cooperation!
maskking high 2.0 vape disposable,maskking high 2.0 electronic cigarette,maskking high 2.0 vape kit,maskking high 2.0 vape starter kit,maskking high 2.0 vape mod kit
Ningbo Autrends International Trade Co.,Ltd. , https://www.ecigarettevapepods.com