1, anti-high temperature: high temperature will greatly shorten the life, electronic components will also accelerate aging, it is best placed in a better ventilated environment.
2, moisture: humidity has a great impact on the life, the ambient humidity is best maintained between 30% -80%, when the humidity exceeds 80%, condensation will occur, the electronic components inside the machine may be wet Rust, corrosion, and severe circuit board short circuit. Debonding can also occur with the button mask. When the humidity is lower than 30%, static electricity is generated. Therefore, it is not necessary to periodically energize the work for a long time to drive the moisture inside the machine.
3, anti-glare: under the illumination of strong light, the body is easy to aging and yellow, the liquid crystal accelerates aging, reduces the luminous efficiency, resulting in the use of the brightness has to be adjusted very high, the result is further accelerated aging, so that the life of the display is greatly shorten. Therefore, do not place it in a place where there is strong sunlight or light, and it is best to place the monitor in a place where the sunlight is weak or not illuminated;
4. Dustproof: Since the printed circuit board inside the display will absorb a lot of dust, affecting the heat dissipation of the electronic components, if the temperature is too high, it will cause leakage and burn out the components, and the dust can absorb moisture and corrode the electrons inside the display. line. Therefore, the monitor should be placed in a clean and clean environment when used normally.
5, anti-magnetic: long-term exposure to the magnetic field may be part of the electronic components magnetized or damaged.
6. Others: When adjusting the brightness knob, it should be slow and steady, and should not be turned hard to prevent damage to the knob. If the display content is constant for a long time, it is best to use a screen saver.
A slip ring is an electromechanical device that allows electricity and data to pass through a rotating assembly. A mercury slip ring uses liquid mercury as the electrically conductive element inside the rotating assembly, as opposed to traditional carbon brushes. Mercury is a better conductor of electricity than carbon, and it also has a very low contact resistance. This makes it an ideal choice for applications that require high-speed data transmission or where reliability is critical. Mercury slip rings are used in a variety of industries, including medical technology, aerospace, and defense.
Why do we choose a mercury slip ring?
A slip ring is an electromechanical device that allows electrical current to pass between rotating objects. Slip rings are often used in applications where a cable or connector would otherwise twist and tangle as the object rotates. There are many different types of slip rings, but one of the most common is the mercury slip ring. Mercury slip rings offer several advantages over other types of slip rings, including high reliability, low maintenance, and long life. Here are three reasons why we choose a mercury slip ring:
1. Reliability: Mercury is an extremely reliable material, and mercury slip rings are among the most reliable types of slip rings available. Mercury has a very low failure rate, and it is not affected by changes in temperature or humidity. This makes mercury slip rings ideal for critical applications where reliability is essential.
2. Low Maintenance: Mercury slip rings require very little maintenance. Because mercury is a very inert substance, it does not corrode or generate any corrosive gases that would affect its reliability. Mercury slip rings do not require any lubrication, and they can operate in a wide range of temperatures and environments.
3. Economical Mercury slip rings have a lifetime cost advantage over other types of slip rings as well. Generally speaking, mercury slip rings are approximately 25% more expensive per kilowatt than other types of slip rings. However, because they require less maintenance and have a greater degree of reliability than other types of slip rings, they will save you money over the lifetime of your equipment.
Mercury Slip Ring,Slip Ring Gigabit Ethernet,Slip Ring 400V,Slip Ring Pneumatic
Dongguan Oubaibo Technology Co., Ltd. , https://www.sliprobs.com