1. Configure your computer's IP address as a static IP address, and in the 192.168.1.20 subnet, the subnet mask is 255.255.255.0. Connect your wireless AP/CPE device to your computer on the same physical network. Open a web browser and enter the default IP address of the wireless AP/CPE device: http://192.168.1.20.
2. Enter the administrator login information and access the web management interface of the wireless AP/CPE device. The default administrator login information is: username: admin, password: admin.
3. When the login is successful, the web management menu will display the following picture. You can start configuring the wireless AP/CPE device from here.
4, open Wireless In the Wireless Wireless SetTIngs Wireless Mode, you can choose 4 working modes.
4.1. Bridge configuration (AP/Bridge) The central bridge is selected and the working mode selected by the remote bridge. When you select Access Point WDS in Wireless Mode, the WDS Peers menu bar will appear on the page. Here you need to fill in the MAC address of the remote bridge StaTIon WDS, up to 6 addresses. The StaTIon WDS also needs to fill in the MAC address of the Access Point WDS device. And fill in the same (SSID, Channel Width channel bandwidth, Frequency frequency) on their respective wireless devices.
Note: When transferring over long distances, open the Advanced Wireless SetTIng's Distance and select the distance actually transferred.
4.2. Client Configuration (CPE) The remote bridge selects the working mode of the station. There is a Select button behind the ESSID on the Station. Click to search for the devices that exist in the vicinity and select the devices to be connected.
Mc4 Connector Extension Cable,Solar Panel Wire 10 Awg,Pv Extension Wire,Optical Ground Wire
Sowell Electric CO., LTD. , https://www.sowellsolar.com