[Brand Power·Huapu Yongming] Modularization will be the future LED street light outlet

Outdoor lighting inevitably has a breathing effect in application. Water vapor condenses into water and remains in the lamp, causing dead lights. This is a failure of the lamp caused by insufficient protection level.

The modular design of the street light can make the outdoor light farewell to the breathing effect. The specific method is to completely isolate the LED chip from the outside world with a double silicone rubber ring. The protection level of each layer has reached IP68, and all water vapor or other harmful gases are eliminated. Erosion of the chip and PCB board, and the design of a screw-free structure to avoid the penetration of water vapor.

Zhan Hao, Deputy Director of Marketing Department of Whampoa

At the same time, regarding the heat dissipation of outdoor lighting products, modular street lamps can use air convection to dissipate heat compared to full-page street lamps, which is very beneficial for heat dissipation. This module not only dissipates heat through the heat sink, but also has a full-structure heat dissipation function through a special structural design.

Huapu Yongming focuses on the field of LED outdoor lighting. Under the premise of the above-mentioned waterproof and heat dissipation, the company currently produces more than 40 kinds of street light modules, with more than 40 kinds of light distribution arrangements. It can be said that the optical library owned by Maple Yongming can meet almost all applications in the field of LED outdoor lighting.

Fiber Adaptor

Sijee Fiber optic adaptors are part of passive components for FTTH ODN connectivity, Sijee Fiber optic adaptors are used to join two fiber optic patch cables together for realizing the transition between different interfaces and they are available for use with either single-mode or multimode fiber optic patch cord. Sijee Fiber optic adaptors can offer superior low loss performance with very high repeatability.

Sijee offers different types of fiber adaptors comply with ITU standard, main products including Fiber Mating Sleeve Adaptor, Fiber Hybrid Adaptor, Fiber Bare Fiber Adaptor, Fiber Mechanical Attenuator, Field Assembly Optical Connector (FAOC), Splice-On Connector, Semi-finished Fiber Connector, etc.

Optical Fiber Couplers,Optical Fiber Adapter,Fiber Optic Adapter,Fiber Optic Flange are available.

Features:
1. Compliant with: IEC, JIS, Telcordia
2. Convenience and ease of handling
3. Optical performance 100% factory tested
4. Flange or threaded mounting type
5. Ceramic/Zirconia or phosphorous bronze sleeves
6. Good changeability and repeatability

Applications:
1. Telecommunication networks
2. FTTX, FTTH
3. LAN, WAN, CATV networks
4. Fiber communications, Data communication networks and processing, Industrial, Mechanical and Military.

5. Active device termination

Optical Fiber Couplers,Optical Fiber Adapter,Fiber Optic Adapter,Fiber Optic Flange

Ningbo Bwinners Optical Tech Co., Ltd , https://www.sijee-optical.com