There are three main reasons for the improper use of TV sets:
1. The environment where the TV is located is poorly ventilated. The TV set that works for a long time produces too high temperature. There is no way to dissipate it. The temperature inside the machine is too high, which may cause fire. This is also because a large number of components such as transformers, picture tubes, tubes, transistors, etc., can emit a large amount of heat when the television is in operation, and this heat energy accumulates in the television to cause an increase in temperature.
Tips: The TV should be placed in a well-ventilated position, especially in the summer, the insulation performance of the TV will be worse, causing the temperature of various components to be too high, short-circuit burnout, causing fire accidents.
2. When the TV is working in a thunderstorm, it may also catch fire due to lightning strikes. At the same time, in order to improve the viewing effect, some users often have to install outdoor antennas, and some even have high antenna racks. These higher antennas are vulnerable to lightning strikes, causing the TV to explode.
Xiaobian Tip: Thunderstorm weather, try not to watch TV. At the same time, users with outdoor antennas should pay attention to whether their antennas have taken lightning protection measures.
3. The voltage device is on fire. Usually, when the user watches TV programs for too long or the indoor temperature is high, the heat of the TV is not easy to put out, or when the TV is not plugged out after watching the TV, some of the TV's transformers will heat up. Long, the temperature rises, and it is easy to cause a fire.
Xiaobian Tip: There are many cases in the country where fires are caused by plugs that are not pulled out. Fire said that many people think that it is okay to turn off the power without using the appliance, and don't care too much about the plug. In fact, the plug is on the socket, the appliance is in a charging mode, and there is current flowing in the appliance, so it is easy to cause a fire. Always remember to unplug the plug when you don't use the appliance.
The 1U Brush Cable Management Panel mounts to a standard 19" rack to organize cables while keeping dust and dirt out of the rack. Constructed of high-quality steel with high-density nylon bristles, the 1U brush plate creates a clean looking point of entry and offers cable separation for simple cable organization. The brush panel also promotes proper airflow through the rack by closing off open spaces between equipment, this cable organizer comes complete with 2 sets of rack screws for easy installation.
Brush Type Cable Management,Brush Cable Management,1u brush panel,1U Cable Management
NINGBO UONICORE ELECTRONICS CO., LTD , https://www.uniconmelectronics.com