Street-block glass ban advertising is no longer across the board
According to the draft of the opinion, in the future, the city will set up an optimized area for outdoor advertising, a strictly controlled area and a forbidden area. The preparation of outdoor advertising special planning and setting technical specifications was originally undertaken by the planning department, and the industrial and commercial department is responsible for the future reform.
According to the existing management methods, outdoor advertising and signboards shall not be set up in the street glass. In the future, there will be no “one size fits allâ€. Commercial buildings or commercial and residential buildings in the optimized area determined by the special plan for outdoor advertising can be used to set up outdoor advertising and signboards in frontage glass, but it cannot affect the ventilation and lighting functions of buildings. Buildings in the forbidden and strictly controlled areas are still not allowed to use outdoor glass to set up outdoor advertising and signboards.
At present, there are many LED outdoor electronic displays in the city. Due to the large brightness, it has become a major source of light pollution, affecting the rest of the surrounding residents, and even affecting road safety. In this regard, the opinion draft stipulates that outdoor advertising and signboards set up in the form of LED outdoor electronic display are prohibited from opening daily from 22:30 to 7:30. At the same time, the display should not exceed 35 meters from the ground, and it is forbidden to set the direction of the road.
The annual "physical examination" violations the maximum penalty of 30,000
The rainy and humid climate of Guangzhou is likely to cause rust in outdoor advertising facilities and become a safety hazard in the typhoon season. To this end, the opinion draft stipulates that: setters and responsible persons should conduct regular safety inspections and inspections of outdoor advertising and signage facilities. It is found that there are safety hazards that should be refurbished or removed immediately. In case of abnormal weather such as typhoon and heavy rain, corresponding safety precautions shall be taken.
The opinion draft also stipulates that if the expiration of two years is set, the installer shall conduct safety inspection before June 1 of each year, and provide the safety inspection report issued by a qualified inspection agency to the examination and approval authority. If the inspection fails, it shall immediately Renovation or removal.
In case of violation of the above provisions, there are potential safety hazards. If it is ordered to be rectified within a time limit or the demolition is not implemented, or the safety test is not carried out. If no test report is provided, the urban management law enforcement agency shall forcefully dismantle it and impose a fine of not less than 20,000 yuan but not more than 30,000 yuan. .
In addition, the city and county-level city management departments should solicit public opinions when preparing outdoor advertising planning, and the time for soliciting opinions should not be less than 30 days.
Smt Holder
Battery Holder
Filter For Smt Machine
High Quality Smt Filter
Smt Filter
Smt Machine Filter
Smt Tape Feeder Parts
Smt Machine Spare Parts
Original Smt Feeder
Original Smt Cable
Smt Machine Cable
Smt Spare Parts Fuji Cable
SMT Cable
Smt Belt
Smt Siemens Belt
Smt Juki Belt
Smt Conveyor Belt
Smt Camera
Smt Laser
Camera For Smt
Smt Siemens Camera
Smt Parts Plastic Rail
Smt Plastic Rail
Smt Juki Plastic Rail
Juki Plastic Rail
SMT Nozzle For Yamaha
Yamaha Nozzle
Nozzles For Yamaha Machine
Smt Yamaha Nozzle
Smt Siemens Nozzle
Smt Nozzle For Siemens
Siemens Nozzle
Smt Nozzle For Samsung
Samsung Nozzle
Smt Samsung Nozzle
Panasonic Nozzle
Smt Panasonic Nozzle
Smt Nozzle For Panasonics
Nozzles For Panasonic Machine
Smt Juki Nozzle
Nozzles For Juki Machine
Juki Nozzle
High Pressure Juki Nozzle
I-Pulse Nozzle
Nozzles For I-Pulsemachine
Smt I-Pulse Nozzle
High Pressure Fuji Nozzle
Nozzles For Fuji Machine
Fuji Nozzle
Smt Fuji Nozzle
Smt Nozzle
Smt Parts Nozzle
Smt Nozzle For Machine
Smt Spare Parts Nozzle
Yamaha Smt Feeder
Yamaha Feeder
Smt Machineyamahafeeder
Smt Feeder For Yamaha
Smt Feeder For Siemens
Smt Machine Siemens Feeder
Siemens Smt Feeder
SIEMENS Feeder
Samsung Smt Feeder
Smt Machine Samsung Feeder
SAMSUNG Feeder
Smt Feeder For Samsung
Panasonic Smt Feeder
SMT Holder
Original Smt Motors
Holder For Smt Type
Smt Battery Holder
Smt Holder
Battery Holder
Filter For Smt Machine
High Quality Smt Filter
Smt Filter
Smt Machine Filter
Smt Tape Feeder Parts
Feeder Parts For Smt Machine
SMT Holder
Holder For Smt Type,Smt Holder,Battery Holder,Smt Battery Holder
Shenzhen Srisung Technology Co.,Limited , https://www.sr-smt.com