First, download the official brush tool and install it. Download Password: rdz9
Download [eight core brush machine tool.rar] Unzip, get PhoneixUSBPro_CN.msi, double-click this PhoneixUSBPro_CN.msi file to install, get PhoenixUSBPro on the desktop
Second, download the brush package
At present Kaiboer F1 4K enhanced edition in addition to the Shenwang production firmware package, the official package download address
Preparation tools: one toothpick, one set-top box, and one data cable.
Find the program that found the programming software "PhoenixSuit.exe" and double-click to open it.
Click - "Browse" to select a good flash package. Note: Brush package should be decompressed.
Add the extracted flash file to the file list.
Brush preparation is temporarily performed here. Next is to connect one of the data cables to the computer's USB port first.
Tips: Use the toothpick to press the reset button. The USB data cable is inserted into the computer first and then the data cable must be inserted after it is inserted.
Use another USB cable interface to connect to the specified USB port of the set-top box (must be connected to the USB port near the network port). The computer will prompt you to find new hardware in the lower right corner of the computer. The USB driver will be automatically installed. (If it fails to install properly, install the driver manually.) Right-click on My Computer (Computer) and select Manage.
Plug in the data cable, connect the set-top box, and pay attention to changes in the device manager after pressing the key.
Plug in the data cable, connect the set-top box, and pay attention to the changes in the device manager after the key operation. Under normal circumstances, when the computer recognizes the tablet computer, the installation driver interface will appear in the device manager. Refer to the tutorial provided by some set-top box manufacturers. In that case, manually select the driver to install. If the interface does not appear, right click on the program with the exclamation mark in the interface above and select “Update Driver†to install the driver.
Congratulations to your Infinik box for Android. Please log in to the sofa to download and install the sofa butler to implement third-party application extensions.
Analysis of advantages and disadvantages of 4G industrial routers
First, what is the classification of industrial routers?
Industrial Router (a communication device that can be divided into 2G routers, 2.5G routers, 3G routers and 4G routers according to network standards.
For users, you can communicate with the Internet by setting a default gateway on your PC or network device. In fact, the default gateway configured for network devices is the packet export for network devices. After the packet is sent to the Ethernet port of the router, the router performs the next job, so the router is an Internet relay.
Second, how do industrial routers work
So how does the router forward the packet? Just like getting somewhere, you need to place a route. This route is a routing table. This routing table contains all the destination network addresses owned by the router, as well as the best path to reach those networks through the router. This is because there is a routing table, so the router can forward packets according to the routing table. That's how routers work.
Understand what is an industrial router and how it works, it is not difficult to understand the advantages and disadvantages of the router. Here we focus on the advantages and disadvantages of 4G industrial routers.
Third, the advantages of 4G industrial routers
For networks interconnected via single-protocol industrial-grade wireless routers, the same or different protocols can be used at layers 1-2. Layer 3 uses the same routable protocol and requires the same or compatible protocols at layer 4 and beyond.
Industrial routers can perform complex routing calculations and are suitable for connecting three or more large networks with complex network topologies.
Industrial-grade routers can isolate broadcast storm information in the source network, thereby reducing and mitigating the impact of broadcast storms.
Multiprotocol industrial wireless routers can be used as network interconnection platforms using different communication protocols because they can connect to the network using different communication protocols.
The entire network router can also be used as a bridge to handle non-routable protocols.
Industrial 4G routers enable you to isolate unnecessary communications so that the interconnected network maintains its own area of independent management and control, thereby improving network security performance. Therefore, industrial-grade 4G routers are commonly used as firewalls to restrict access to the internal and external networks (Internet) of the LAN, as well as the internal areas of the LAN, and act as network masking.
It can provide reliable transport and prioritization services, and industrial LTE routers do not need to maintain a persistent connection between networks that communicate with each other.
Complete Netcom router network segmentation improves network performance and reduces host load.
Third, the advantages of 4G industrial routers
High price
When installing an industrial LTE router, it is difficult to install and maintain due to the large number of initial configurations
If you spend more time processing, the transmission performance of the entire network of the industrial router will decrease.
Unlike Bridges, routers across industrial networks are protocol-related. Each advanced protocol used for network connectivity must be configured separately, and an industrial-grade network-grade router with a separate protocol for each protocol must be provided.
Industrial Netcom routers do not support non-routed protocols, so when interconnecting multiple networks, there are restrictions on the protocols used by the connected networks.
4G Industrial Router,Sim Router Industrial,Industrial Lan Router,4G Modem Router Industrial
Shenzhen MovingComm Technology Co., Ltd. , https://www.szmovingcomm.com