In the "Architectural Lighting Design Standards", corresponding provisions are made for setting the illumination intensity of emergency lighting:
(1) The illuminance of evacuation evacuation channels shall not be less than 0.51x;
(2) The illuminance of the safety lighting is not lower than 5% of the general lighting illuminance of the site;
(3) The illuminance value of the standby lighting, unless otherwise specified, shall not be less than 10% of the general illuminance of the site.
2. The selection of light sources and lamps (1) In the rooms with lower height, a straight tube fluorescent tube with a narrow diameter should be adopted;
(2) Store halls should adopt narrow-pipe straight fluorescent lamps, compact fluorescent lamps or low-power metal halide lamps;
(3) High-rise industrial plants can use metal halide lamps or high-pressure sodium lamps, or high-power thin-tube lamps;
(4) Fluorescent high-pressure mercury lamps should not be used in general lighting locations, and self-ballasted fluorescent high-pressure mercury lamps should not be used;
(5) Under normal circumstances, indoor and outdoor lighting should not use ordinary lighting incandescent lamps;
(6) Incandescent lamps can be used in the following places:
1) Where an instantaneous start and continuous dimming are required, when other light source technologies are economically unreasonable;
2) places with strict requirements for preventing electromagnetic radiation interference;
3) frequent switching lights;
4) places with low illuminance and short lighting time;
5) Places with special requirements for decoration.
3. Illumination notes for other special occasions (1) The lighting of the library's library, especially those where precious materials are stored, should use light sources with little or no ultraviolet radiation;
(2) The lighting of restaurants and bedrooms should use low color temperature light source;
(3) When designing classroom lighting, the long axis of fluorescent tubes should be arranged perpendicular to the blackboard to reduce the interference of direct glare.
Cable Stripper
MARSHINE stripper is used to remove the outer protective layer, semi-conducting layer, as well as the insulating layer. The diameter of cable suited for our product can vary from 60 to 105mm.
Ningbo MARSHINE Power Technology Co., Ltd. is a professional engaged in the development, design and manufacture of power engineering construction equipment and tools.
MARSHINE company produces circuit construction tools, including foundation construction, tower group lap. Wiring structure. Cable construction, cable construction, mobile knife mill, insulated overhead cable and high voltage cable stripper, all kinds of aluminum alloy pull rod, guide rail, grounding device, high strength shackle, ratchet wrench and pointed wrench, double hook tight line device, lifting pulley, nylon wheel and aluminum wheel, punching machine ect.
MARSHINE continues to carry forward the enterprise spirit of "integrity, development, innovation" and strive for the prosperity and development of the electric power industry.
Welcome to contact MARSHINE and reach cooperation, thank you!
Cable Stripper,Manual Wire Stripping,Wire Strippers,Cable Stripper Machine
MARSHINE , https://www.puller-tensioner.com