MTSH-33 pressure filter device use method - Database & Sql Blog Articles

MTSH-33 pressure filter device use method

Pressure filter

Scope of application

This product can be widely used in pharmaceutical, biological products, mining pump and beverage, brewing, watches and other industrial water quality, medical oil, lubricating oil, combustion oil and scientific research laboratories to filter bacteria and particles. Generally diameter is

0.65

Micron can remove particles, diameter is

0.45

The following can be sterilized. This product uses positive pressure pressurization, which is faster than negative pressure work.

Pressure filter

Instructions

Insert the special funnel with the outer pressure tank and install the top cover.

Place the filter flat in the cleaning container and use

70

Soak the distilled water around the degree to make the test piece all wet, after a few hours (about

4

More than an hour) pour the water, soak it overnight with the above method, and then rinse it with warm distilled water before use.

Put the cleaned filter membrane (wet) into the sand core funnel and lay it on the sand core to prevent leakage around. Put the filtrate into the liquid inlet. Wait until the funnel removes the air. After the bubbles disappear, tighten the liquid inlet. Filter.

Precautions

Water film is suitable for

Ph2-9

The liquid medicine should not be used for strong acid or alkali or organic solvents including alcohol.

This product is generally resistant to temperature

130

Degree, withstand voltage

3-4

kg

/

Square centimeter.